Florabest FHM 38 A1 - Handbuch (Seite 8)

8
GB IE
Adjusting the Cutting Clearance
Whilst setting the device, avoid
hands and feet from getting
stuck between the movable
knives and stationary parts of
the device. Risk of injury!
The blade cylinder blades must be adjusted
if the grass is no longer being cut evenly
and cleanly.
1. Remove the machine key (3) and
metal strips (feeler gauge) (4) from
the machine holder (cf. 5).
2. Push the metal strip (4) between a
blade cylinder (8) blade and the
sub-blade (11).
3. Turn the hex bolts (10) to the right
then to the left on the machine,
in small steps in the clockwise
direction until the metal strip sticks
slightly.
4. Check the setting by turning the
blade cylinder. None of the blade
cylinder blades should be in con-
tact and grinding on the sub-blade.
5. Return the machine key (3) and the
metal strip (feeler gauge) (4) to the
tool holder (cf. 5).
If it is no longer possible to adjust
the cutting clearance, the blade
cylinder and sub-blade must be re-
placed as a set.
Storage
• Keep the machine dry and out of reach
of children.
For space-saving storage, loosen the
wing nuts and fold the handle bar
together.
Disposal/Environmental
Protection
Recycle the device, accessories and packag-
ing in an environmentally friendly manner.
• Machines do not belong in domestic
waste. Take the machine to a recycling
point. The plastic and metal components
used can be separated by type and there-
fore recycled. Ask your dealer about this.
• Do not dispose of cut grass in the dustbin;
use it for composting or spread it as a
mulch layer under shrubs and trees.
Guarantee
Dear Customer,
This equipment is provided with a 3-year
guarantee from the date of purchase.
In case of defects, you have statutory rights
against the seller of the product. These statu-
tory rights are not restricted by our guaran-
tee presented below.
Terms of Guarantee
The term of the guarantee begins on the
date of purchase. Please retain the original
receipt. This document is required as proof
of purchase.
If a material or manufacturing defect occurs
within three years of the date of purchase
of this product, we will repair or replace –
at our choice – the product for you free of
charge. This guarantee requires the defec-
tive equipment and proof of purchase to be
presented within the three-year period with
a brief written description of what consti-
tutes the defect and when it occurred. If the
defect is covered by our guarantee, you will
receive either the repaired product or a new
product. No new guarantee period begins
on repair or replacement of the product.