Florabest FLB 3000 A1 - Handbuch (Seite 31)

30
GB
Content
Illustrations A-D
Introduction 30
Intended use
30
Scope of deliverables 30
Description of product 30
Unpacking 30
Technical Specifications 31
Safety symbols
31
General safety instructions 32
Training 32
Preparation 32
Operation 32
Maintenance and storage
32
Safe operation 33
Personal safety 33
Careful handling of tools 33
Special safety instrucions leaf blowers/vacuums 34
Preparing of the blower vac prior to use 35
Assembly 35
Intake/ Air outlet tube 35
Fitting the debris collection bag 35
Fitting the shoulder harness 36
Before starting 36
Operation 36
Starting the Vacuum-Blower 36
Stopping the Vacuum- Blower 36
Using the Vacuum-Blower 36
Blower mode 36
Vacuum mode
36
Adjust the front handle 37
Using the leaf rake 37
Cleaning flap 37
Cleaning and Storage 37
Power Cord Maintenance 37
Troubleshooting 37
Waste disposal and environmental protection 38
EC Declaration of Conformity
38
Guarantee 38
Repair service
39
Spare parts 39
Warranty card 40
Explode drawing 42
Introduction
Congratulations on the purchase of your new device.
You have chosen a high quality product. The operat-
ing instructions are a constituent part of this product.
They contain important information for safety, opera-
tion and disposal. Familiarise yourself with all operat-
ing and safety instructions prior to using the product.
Use the product only as described and for the areas of
application stated. If the device is passed on to a third
party then pass all of the documentation on with it.
Intended use
The leaf vac is exclusively used in the two fol-
lowing ways:
1.As a leaf vac for vacuuming up dry leaves.
2.As a blower it is used to collect together dry leaves
or to remove them from inaccessible places (e.g.
under vehicles).
In suction mode it also works as a shredder, where
the volume of the leaves is reduced by a ratio of
approx. 15:1 and takes up less space in the leaf
collection bag and the collected material is simulta-
neously prepared for possible composting.
Each type of use other than those given in these
instructions for use can damage the machine
and cause serious risk to the user.
Please always observe the safety instructions in order
to safeguard your guarantee claim and in the interests
of product safety. Due to the machine’s design, we are
unable to fully exclude all residual risks.
Scope of deliverables
Description of product (Fig. 1)
1 Motor housing
2 Adjusting speed controller
3 ON/OFF-Switch
4 Power cord & plug
5 Selection knob
6 Wheel
7 Lower tube
8 Upper tube
9 Collection bag
10 Cable strain relief
11 Screw plug
12 Cleaning flap
13 Front handle
14 Shoulderbelt
15 Operating Instructions
Unpacking
Due to modern mass production techniques, it
is unlikely that your power tool is faulty or that