Ordex Z30384 - Handbuch (Seite 6)

8 GB/IE
Start of operation / Cleaning and care / Disposal
Start of operation
Note: The stainless steel bin can be opened or
closed by means of the automatic sensor, the press
of a button or by hand. Manual opening or closing
has no effect on the operation of the sensor or
buttons.
Note: Switch the device off if the lid
1 neither
opens nor closes manually or automatically. To do
this move the ON / OFF switch
6 into position 0
(OFF). Then move the ON / OFF switch 6 back
into position 1 (ON) to open or close the lid by
means of the sensor or manually.
Using the automatic sensor
Press I (ON) on the ON / OFF button 6 at
the back of the device. The LED 4 will flash
red (standby operation).
Move your hand within the detection range of
the sensor 2 (see Fig. B).
Note: The detection range is approx. 10–15 cm.
The lid 1 will open automatically. The LED 4
will emit a green light. The lid 1 will automati-
cally shut after approx. 5–6 seconds.
Press 0 (OFF) on the ON / OFF button 6 at
the back of the device if you are not going to
use the automatic sensor for any length of time.
This will extend the lifetime of the batteries.
Opening / shutting the lid by
pressing the button
Press I (ON) on the ON / OFF button 6 . The
LED 4 will flash red (standby operation).
Press the OPEN button 5 . The lid 1 will open
automatically. The LED 4 will emit a green light.
Press the CLOSE button 3 . The lid 1 will shut
automatically.
Press 0 (OFF) on the ON / OFF button 6 if
you are not going to use the button function for
any length of time. This will extend the lifetime
of the batteries.
Note: Press 0 (OFF) on the ON / OFF button 6
to switch off the device.
Cleaning and care
CAUTION! The top part of the stainless steel
bin must not be immersed into water. Otherwise
this may lead to damage of the top part.
Never use any corrosive detergents that have
substances that contain chlorine or acid in them.
Clean the whole top part with a moist cloth and,
if need be, a mild detergent.
Clean the stainless steel areas with a commercial
stainless steel cleaner and a microfibre cloth.
Note: Please pay attention to the manufacturer’s
instructions.
Clean the plastic inner bucket with a moist cloth
and, if need be, a mild detergent or rinse under
running water. The plastic inner bucket must be
completely dry before putting it into the stainless
steel bin again.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Batteries should not be disposed
of in normal domestic waste!
Batteries must not be disposed off with domestic
waste. They may contain toxic heavy metals and
are subject to hazardous waste treatment rules and
regulations. The chemical symbols of the heavy
metals are as follows: Cd = cadmium, Hg = mercury,
66714_ord_Sensor-Muelleimer_Content_LB3.indd 8 17.06.11 10:03