Livarno Z30755A Z30755B - Handbuch (Seite 7)

7 GB/IE
Safety / Preparation for use
J Children or other individuals who do not know
or have no experience of handling this device,
or whose physical, sensory or mental abilities
are restricted, must not use the device without
supervision or instruction by an individual respon-
sible for their safety. Children must be super-
vised in order to ensure that they do not play
with the device.
m CAUTION! RISK OF INJURY! Please do
not use this device if you find that it is dam-
aged in any way.
J Check whether all of the parts are correctly
fitted. If the device is not correctly assembled
there is a danger of injury.
m CAUTION! RISK OF INJURY! Have any
repairs carried out by a competent specialist.
A damaged device presents a serious risk of
injury from electric shock.
J Use the device only as described. Never take
the light body
2 apart. Do not carry out any
unauthorised adjustments and modifications to
the device. Failure to observe this advice may
detrimentally affect the safety of the device.
J Do not immerse the device in water.
J Always keep the device clean.
J The LEDs cannot be replaced.
Battery Safety
Instructions
DANGER TO LIFE! Keep
batteries out of the reach of children. Do not
leave batteries lying around. There is a risk of
children or animals swallowing them. Consult a
doctor immediately if a battery is swallowed.
J EXPLOSION HAZARD! Never
recharge nonrechargeable batteries,
short-circuit and / or open batteries.
This can cause them to overheat, burn or burst.
Never throw batteries into fire or water. The
batteries may explode.
J Remove spent batteries from the product
immediately. Otherwise there is an increased
risk of leakage.
J Always replace all batteries at the same time.
J Do not use different types of batteries or mix
used and new batteries together.
J Check regularly that the batteries are not
leaking.
J Leaked or damaged batteries can
cause chemical burns if they come
into contact with the skin; in such
cases you must wear suitable protective gloves.
J Remove the batteries from the product if it is
not in use for any length of time.
J Make sure that the polarity is correct when you
insert the batteries. This is indicated on the base
of the light body
2 and inside the battery
compartment cover 7 . The batteries can other-
wise explode.
J Remove used batteries from the device. Very
old or used batteries may leak. The chemical
fluid can damage the product.
Q Preparation for use
You can operate the lights using batteries (included)
or a USB cable
11 (included).
Q Inserting / replacing
the batteries
Note: Use the three supplied batteries when
preparing the device for first use. When you wish
to replace the batteries, be sure to use 1.5 V
AA batteries only.
Note: To do this you will require a Phillips screw-
driver.
j Remove the silicone protective cover 6 (see
Fig. B).
j Unscrew the screw 9 of the battery compart-
ment cover 7 by turning it anticlockwise using
a Phillips screwdriver. Remove the battery com-
partment cover
7 (see Fig. C).
j Insert the three supplied batteries into the bat-
tery compartment
8 , observing the correct
polarity. The correct polarity is shown on the