Silvercrest SRGS 1300 A1 - Handbuch (Seite 7)

6
• If the appliance is connected to the
mains it may be damaged by lightning
during thunderstorms.
3.4 Protection against scalds and
burns
W arning! Hot surfaces and boiling
fat can cause injuries. Please note
therefore:
• The metallic surfaces of the appliance
can get hot. Only hold the appliance by
the handle 4 .
• Do not move the appliance while in use
and do not touch the base section 6 , the
grill plate 2 or the stone grill plate 1 .
These get very hot when the appliance is
in use. This will ensure you avoid
sustaining any burns.
• Use oven gloves when cooking food at
high temperature. Otherwise, splashed
fat could cause burns.
• Do not use the appliance without the grill
plate 2 or stone grill plate 1 . Other wise,
the heating elements will be exposed
posing a risk of severe burns if touched.
• Always allow the appliance to cool
down before cleaning.
• If fat on the appliance catches fire do not
use water to extinguish the fire! There is
a risk of explosion or electric shock.
Instead, use a fire blanket or other
appropriate method.
• Never use the appliance near curtains
and other flammable materials. If the
grilled food catches fire, the flames
could easily spread to other objects.
3.5 For the safety of your child
W arning! Children are often
unaware of danger and are
injured as a result. Please note
therefore:
• Only allow children to use this appliance
under the supervision of an adult.
• Ensure the appliance is always kept out
of the reach of children.
• Ensure that children cannot pull the
appliance down onto themselves with
the cable.
• Ensure that the packing foil does not
become a deadly trap for a child.
Packing foils are not toys.
4. Before using for the first time
During manufacture, many par ts are given a
thin film of protective oil. Before using the
appliance for the first time, heat it up without
any food so that any residues can
evaporate.
Note: When heating up for the first few
times a slight smell may be produced. Make
sure the room is adequately ventilated.
1. Take the appliance and all the accessory
parts out of the packaging.
2. Check that the appliance shows no signs
of damage.
3. Remove any labels or stickers (but not
the type plate on the underside).
4. Clean the appliance before using it for
the first time. Observe the information in
the section entitled "6. Cleaning" on
page 9.
5. Select a location that is firm, level and
not flammable. Maintain a distance of
approx. 50 cm from other objects.
6. Turn the temperature regulator 5 to "0".
This switches the appliance of f.