Electrolux WA SL1 E 102 - Handbuch (Seite 47)

6. When no more water comes out, un-
screw the pump and remove it. Always
keep a rag nearby to dry up spillage of
water when removing the pump.
7. Remove any objects from the pump im-
peller by rotating it.
8. Put the cap back on the emergency
emptying hose and place the latter
back in its seat.
9. Screw the pump fully in.
10. Close the pump door.
Warning! When the appliance is in use
and depending on the programme
selected there can be hot water in the
pump. Never remove the pump cover
during a wash cycle, always wait until
the appliance has finished the cycle,
and is empty. When replacing the
cover, ensure it is securely re-tightened
so as to stop leaks and young children
being able to remove it.
Cleaning the water inlet filters
Important! If the appliance doesn't fill,
takes long to fill water, the starting button
blinks yellow or the display (if available)
shows the relevant alarm (see chapter
"What to do if..." for more details), check if
the water inlet filters are blocked .
To clean the water inlet filters:
1. Turn off the water tap.
2. Unscrew the hose from the tap.
3. Clean the filter in the hose with a stiff
brush.
4. Screw the hose back onto the tap.
Make sure the connection is tight.
5. Unscrew the hose from the machine.
Keep a rug nearby because some water
may flow.
electrolux 47