Electrolux WA SL1 E 102 - Handbuch (Seite 51)

Problem Possible cause/Solution
Spinning starts late or the machine does not
spin:
The electronic unbalance detection device has
cut in because the laundry is not evenly distrib-
uted in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen
several times before the unbalance disappears
and normal spinning can resume. If, after some
minutes, the laundry is still not evenly distributed
in the drum, the machine will not spin.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manual-
ly and then select the spinning programme.
The machine makes an unusual noise:
The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a soft-
er start and more even distribution of the laun-
dry in the drum when spinning, as well as in-
creased stability of the machine.
No water is visible in the drum:
Machines based on modern technology operate
very economically using very little water without
affecting performance.
The display shows the alarm code :
Anti-flooding system has activated.
• Pull out the plug from the power socket,
close the water tap and contact the Service
Force Centre.
If you are unable to identify or solve the prob-
lem, contact our service centre. Before tele-
phoning, make a note of the model, serial
number and purchase date of your ma-
chine: the Service Centre will require this in-
formation.
TECHNICAL DATA
Dimensions Width
Height
Depth
Depth (Overall dimensions) 60 cm
85 cm
60 cm
63 cm
Electrical connection
Voltage - Overall power - Fuse Information on the electrical connection is given on the rating
plate, on the inner edge of the appliance door.
Water supply pressure Minimum
Maximum 0,05 MPa
0,8 MPa
Maximum Load Cotton 8 kg
electrolux 51