Electrolux WA SL1 E 102 - Handbuch (Seite 49)

Problem Possible cause/Solution
The washing machine does not start:
The door has not been closed.
• Close the door firmly.
The plug is not properly inserted in the power
socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installa-
tion.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and
the button 7 has not been depressed.
• Please turn the selector dial and press the but-
ton 7 again.
The delay start has been selected.
• If the laundry is to be washed immediately,
cancel the delay start.
The Child Safety lock has been activated.
• Deactivate this device.
The machine does not fill:
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter
are blocked .
• Clean the water inlet filters (see "Cleaning the
water inlet filters" for more details) .
The door is not properly closed.
• Close the door firmly .
The machine fills then empties immediately:
The end of the drain hose is too low.
• Refer to relevant paragraph in «Water drain-
age» section.
The machine does not empty and/or does
not spin:
The drain hose is squashed or kinked.
• Check the drain hose connection.
The drain filter is clogged.
• Clean the drain filter.
An option or a programme that ends with the wa-
ter still in the tub or a that eliminates all the spin-
ning phases has been selected.
• Select the draining or the spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
electrolux 49