Jotul F 500 - Handbuch (Seite 37)

37
ENGLISH
Service
Changing the burn plates
• The stove has burn plates that are mounted to the sides
and fire bricks in the back.
• Unfasten the screws and remove the burn plates. To reinstall,
make sure the insulation is properly fastened to back of
the burn plates.
• The bricks at the back are easy to change. Simply lift up a
little and pull out.
Changing the baffle plate
• The baffle plate consists of a vermeculite plate, and rests
on top of the pipes that supply secondary air.
• To remove, just lift it off and out
• To install, follow the same procedure in opposite sequence.
Make sure the vermeculite plate is fitted closely against
the back wall.
• Be aware that the vermiculite plate may be damaged by
rough handling.
• Then place the insulating blanket on top of the baffle plate.
Optional equipment
Connecting pipe for outdoor
ventilation - Cat. No. 221031
With the aid of a connecting pipe for outdoor ventilation and a
flexible tube, combustion air can be connected to the product
directly from the outside. In this manner, the fireplace will
always be supplied with the air needed to achieve proper
combustion.