Seagate BARRACUDA 4 FAMILY ST15150W/WD/WC - Handbuch (Seite 39)

Barracuda 4 Installation Guide, Rev. E 37
Terminator power
There are four possible terminator power configurations
for the ST15150N drive (see Figure 12). You will not
normally need to change this option and can leave the
drive configured as it was shipped from the factory.
The ST15150ND drive should be configured with a
jumper connecting J01 pins 1 and 3 (and no jumper on
J01 pins 2 and 4) as illustrated in Figure 12.
Figure 12. Setting terminator power jumpers
Term. power from drive (default).
ST15150N
ST15150ND
Term. power from SCSI bus.
Term. power to SCSI bus.
Term. power to SCSI bus and drive.
J01
Pin 1
Pin 2
Pin 3
J4
J01
Power
Connector
Term. power to SCSI bus. (All other
J01 jumper positions are invalid for
ST15150ND drives.)
J01
Pin 1
Pin 2
Pin 3
N/ND drives