Seagate BARRACUDA 4 FAMILY ST15150W/WD/WC - Handbuch (Seite 42)

40 Barracuda 4 Installation Guide, Rev. E
Setting the SCSI ID jumpers
Use the J5 connector to set the SCSI ID (Figure 15). To
change the SCSI ID, install jumpers on the appropriate
pins as shown in the illustration.
DC Power
Connector
SCSI I/O
Connector
SCSI ID = 8
SCSI ID = 9
SCSI ID = 10
SCSI ID = 11
SCSI ID = 12
SCSI ID = 13
SCSI ID = 14
SCSI ID = 15
SCSI ID = 0 (default)
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
J5
4P 3P 2P 1P
Pin 1 Pin 1
ID3
ID2
ID1
ID0
J5
Figure 15. Setting the SCSI ID
W/WD drives