Revox M642 HD - Handbuch (Seite 44)

General operation
16 ENGLISH
General operation
To switch the display on
. To switch the display on, set the mains switch to position ”I”.
The standby LED on the infrared sensor lights up red.
. Now press one of the numeric buttons or [TV] / [VIDEO] / [PC] button on the remote control to switch the display on.
The OPERATING LED on the infrared sensor lights up blue.
The display must be ”powered up”. This is comparable to the process with a PC and takes several seconds.
To switch the display off
. Press the standby button on the remote control.
The display switches back to standby mode.
The standby LED on the infrared sensor lights up
red.
. To switch the display off again completely, set the mains switch to position ”0”.
If no signal is pending on screen, it automatically goes into standby mode.
.
To switch on again, press one of the numeric buttons on the remote control.
Changing channel
When you change from one TV channel to another, first of all you see a still picture of the 1st channel and then a moving picture
of the other channel.
Regulating the sound
Regulating the volume
. You press the button [ A Vol - ] or [ " Vol + ] on the
remote control, to set the desired volume. The cur-
rent volume control appears on the screen.
. Select the option <SOUND ⇒ VOLUME>.
Menu items:
Volume = The current volume
Max Startup Volume = Presetting for the volume when
the display is switched on
Sound setting
Under the option <EQUALIZER> you can set the pre-
defined acoustic pattern.
Standby button
Volume:
Volume:
Balance:
Equalizer:
User
Option: Stereo
Volume Line Out:
Max Startup Volume:
AVC:
Off
User Equalizer >
←
Inputs / PIP >
Picture >
Display >
Sound >
Set Up >
Info >
Volume:
Balance:
Equalizer:
User
Option: Stereo
Volume Line Out:
Max Startup Volume:
AVC:
EIN
User Equalizer >
Rock
Jazz
User
Flat
Pop
Classic
Vocal
←
Acoustic pattern: