General operation – Revox M642 HD Benutzerhandbuch

Seite 50

Advertising

General operation

ENGLISH

Automatic switch-off

You can set the display so that it switches off automati-
cally after a certain amount of time.

Under the option <SLEEP TIMER> select one of
the preset times 30 , 60 or 90 minutes.

When this period of time has elapsed the display swit-
ches off automatically.

Switching over to dual sound

Dual channel sound is intended for films where the viewer has the option to switch between the dubbed version and the original
language.
If channels are transmitted with dual channel sound, channel ”A” is active first of all.

Press the button [M/S] to switch over to channel ”B”.

Decoder mode

Under the option <INPUTS / PIP

⇒ MAIN INPUT SETTINGS ⇒ MANUAL SEARCH ⇒ OPTION> you can select the decoder

mode for each channel location.

Support of the HDTV standard

(High Definition Television)

The input ports ”PC(DVI) and PC(RGB)” are available for components (receiver; set-top boxes) that supply output signals in com-
pliance with HDTV standard.
The HDTV formats can be displayed: 480 i, 480 p, 576 p, 720 p and 1080 i.

The input port ”YUV” is not envisaged for HDTV. Picture distortions can occur, if the input signal is incompatible.

Progressive scan

(Input signal at the YUV input port)

Modern components (DVD players; set-top boxes)
have the facility to generate so-called ”progressive
scan signals”. These signals can be processed via the
YUV input port. You can activate the support via the
menu option <INPUTS / PIP

⇒ SETTINGS ⇒ YUV

PROGRESS.> ON.

The component must support the standard EIA-770.2.
Standard TV resolution (480 or 576 lines; for HDTV resolutions see HDTV)

HDCP compatibility
(High Bandwidth Content Protection)

Copying protection for the digital video interface DVI
(HDCP) is active when the input port ”PC(DVI)” is se-
lected and menu option <DVI-MODE> is set to
”HDCP”. If components without HDCP support are
connected to the input port ”PC(DVI)”, you must set the
menu option <DVI-MODE> to ”PC”.

If you are using a component (DVD player) that is not exactly compliant with the HDCP standard, picture errors may
occur. If any errors occur, switch the connected component OFF and back ON again.

Display Source Info:

Language:

Deutsch

OSD Set Up:

Pwr Down/Stand--By:

Reset to factory Defaults

Sleep Timer:

Off

←

Main input settings

Main input:

TUNER

YUV progress.:

Off

←

PIP Mode:

Off

←

Inputs / PIP

Picture

Display

Sound

Set Up

Info

H Freq :

60.0 kHz

V Freq :

75.0 Hz

Pixel Clk : 78.75 MHz
H/V Pol :

+ / --

Overscan:

Off

DVI-Mode:

HDCP

←