Selecting & playing voices, Turn power on, Set the volume – Yamaha CLP-860 Benutzerhandbuch

Seite 11: Select a voice, Play, Add effects as required, Clp-880

Advertising
background image

11

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

CLP-880/860/840/820/820S

Selecting & Playing Voices

Turn Power On

..................................................................................................

After making sure that the Clavinova’s AC cord is properly plugged

into the Clavinova itself and plugged into a convenient AC wall outlet,
press the [POWER] switch located to the right of the keyboard to turn
the power ON. In some areas a plug adaptor may be provided to match
the pin configuration of the AC wall outlets in your area.

When the power is turned ON, one of the voice selector LEDs will

light, and the power indicator located below the left end of the key-
board will light (except for CLP-820S).

Set the Volume

..................................................................................................

Initially set the [MASTER VOLUME] control about half way

between the “MIN” and “MAX” settings. Then, when you start playing,
re-adjust the [MASTER VOLUME] control for the most comfortable
listening level.

Select a Voice

.....................................................................................................

Select the desired voice by pressing one of the voice selectors. Use

the [VARIATION] button to select a variation of the current voice, as
required.

POWER

CLP-880

Play

................................................................................................................................

The Clavinova also offers keyboard touch response, so the volume

and timbre of notes played can be controlled according to how “hard”
you play the keys. The amount of variation available depends on the
selected voice.

Add Effects As Required

.......................................................................

You can add or change reverb, effects (CLP-880/860/840) and

brilliance (CLP-880/860/840) as desired by using the [REVERB]
button (page 18), [EFFECT] button (page 19) and the [BRIL-
LIANCE]
control (page 19).

REVERB

ROOM
HALL 1
HALL 2
STAGE

EFFECT

CHORUS
SYMPHONIC
TREMOLO
DELAY

BRILLIANCE

BRIGHT

MELLOW

VARIATION

STRINGS

HARPSI-

CHORD

PIPE

ORGAN

CHURCH

ORGAN

JAZZ

ORGAN

BASS

GRAND

PIANO

JAZZ

PIANO

CLASSICAL

PIANO

ROCK

PIANO

E. PIANO 1

E. PIANO 2

MASTER
VOLUME

MAX

MIN

Advertising