Yamaha CLP-860 - Handbuch (Seite 58)

58 CLP-880/860/840/820/820S
4
V
Attach the rear panel (B).
With the rear panel slightly angled as shown in the illustration,
lower it onto the feet’s protruding edge at the rear of the pedal
box. Then, while eliminating any gaps between the rear and side
panels, secure the top of the rear panel to the side panel brackets
using two 4
x 12 mm round-head screws 3. Finally, secure the
bottom of the rear panel to the pedal box using four 4 x 20 mm
tapping screws 4.
B
B
D
4 x 20 mm tapping screws
4
4 x 12 mm round-head screws
3