Yamaha CLP-860 - Handbuch (Seite 37)

37 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
CLP-880/860/840/820/820S
The Function Mode
F9 CLP-880/860 Backup Functions
After selecting “F8.Y” or “F9.Y”, press the [+/YES] button to engage the backup function
sub-mode, then use the FUNCTION [<] and [>] buttons to select the desired backup func-
tion, as listed below.
NOTE • The backup settings themselves, and the contents of the recorder memory, are always backed up.
• Even if the Backup is turned on, factory presets can be recalled at any time (see page 40). The
factory setting list is found on page 42.
Even if backup is turned on via one of the functions described below, the data will only be
retained in memory for about 1 week if the power is not turned on during this time. If the
backup period is exceeded, all settings will be reset to their default values. If you want to
retain the backup settings for longer periods, be sure to turn the power switch on for a few
minutes at least once a week.
F8.2/F9.2: MIDI
................................................................................................................................................
Turns backup of the MIDI functions listed below on or off. Use the [–/NO] and [+/YES]
buttons to turn backup “On” or “OFF”.
The default backup mode is “OFF”.
• Channel (Transmit, Receive) • Local ON/OFF
• Program Change ON/OFF • Control Change ON/OFF
• MIDI Transmit Transpose
F8.3/F9.3: Tuning
.........................................................................................................................................
Turns backup of the tuning functions listed below on or off. Use the [–/NO] and [+/YES]
buttons to turn backup “On” or “OFF”.
The default backup mode is “OFF”.
• Transpose • Tuning • Scale (including base note)
F8.4/F9.4: Pedal
............................................................................................................................................
Turns backup of the pedal functions listed below on or off. Use the [–/NO] and [+/YES]
buttons to turn backup “On” or “OFF”.
The default backup mode is “OFF”.
• Left Pedal Mode • Damper Mode (CLP-880/860)
• Soundboard Depth (CLP-880/860)
F8.1/F9.1: Voice
.............................................................................................................................................
Turns backup of the voice functions listed below on or off. Use the [–/NO] and [+/YES]
buttons to turn backup “On” or “OFF”.
The default backup mode is “OFF”.
• Voice (Keyboard, Dual, and Split)
• Dual (ON/OFF, Voice, and Dual Functions for each voice combination)
• Split (ON/OFF, Voice, and Split Functions for each voice combination : CLP-880/860)
• Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each voice : CLP-880/860/840)
• Variation (for each voice)
• Touch Sensitivity (including the FIXED volume)
• Metronome (Beat, Volume)
• Piano Song Part Cancel Volume
F8 CLP-840/820/820S Backup Functions