Before using the oven for the first time – Zanussi ZOU 461 Benutzerhandbuch

Seite 25

Advertising
background image

25

Double circuit cooking zone

(Check the combination hob list in the "Technical
Data" chapter)
If you wish to have the two electric circuits work
simultaneously, turn the knob to maximum position 9
and then turn it towards symbol “

”. You will hear

a click. Now the 2 circuits work together.
Then, you can regulate the power of the cooking zone
by turning the control knob anticlockwise.

Carefully supervise cookings with oil or fats,

since these types of food can result in a fire,

when over-heated.

Safety Thermostat

To prevent dangerous overheating (through incorrect

use of the appliance or defective components), the oven is

fitted with a safety thermostat, which interrupts the power

supply. The oven switches back on again automatically,

when the temperature drops.

Should the safety thermostat trigger due to incorrect use

of the appliance, it is enough to remedy the error after the

oven has cooled down; if on the other hand, the thermostat

triggers because of a defective component, please contact

Customer Service.

The Cooling Fan

The cooling fan is designed to cool the the oven and

the control panel. The fan switches on automatically after a

few minutes of cooking. Warm air is blown out through the

aperture near the oven door handle. When the oven is

switched off, the fan may run on after the oven is switched

off to keep the controls cool. This is quite normal.

The action of the cooling fan will depend on how

long the oven has been used and at what

temperature. It may not switch in at all at lower

temperature settings nor run on where the oven has

only been used for a short time.

Before using the oven for the first time

Remove all packaging, both inside and outside

the oven, before using the oven.

Before using for the first time, the oven should be

heated up without food.

During this time, an unpleasant odour may be emitted.

This is absolutely normal. It is caused by manufacturing

residues.

Ensure the room is well ventilated.

1. Switch the oven function control knob to fan

cooking

.

2. Set the thermostat control knob to 250.

3. Open a window for ventilation.

4. Allow the oven to run empty for approximately

45 minutes.

)

Advertising