Zanussi ZOU 461 Benutzerhandbuch

Seite 27

Advertising

“Cooking Duration” function

This function allows the oven to automatically switch

off at the end of a programmed cooking duration time. Place

food in the oven, select a cooking function and adjust the
cooking temperature. Press button

repeatedly to select

the “Cooking Duration” function. The relevant pilot lamp

will start flashing. Then, proceed as follows:

To set the duration time:
1. Press button “ ” or “ ”.

2. After the setting is carried out, wait for 5 seconds: the

"Cooking Duration" pilot lamp

will come on and

the display will revert to the time of day.

3. When cooking time is over, the oven will be switched

off automatically and an acoustic alarm will be heard,

while the pilot lamp will start flashing. Turn the oven

function and the thermostat control knob to zero.

To switch off the acoustic alarm, press any button.

NOTE: turning the acoustic alarm off will reset the

oven to manual, and if the oven function and the

thermostat knobs are not set to zero the oven will start

to heat again.

To cancel the duration time:
1. Press button

repeatedly to select the “Cooking

Duration” function. The relevant pilot lamp

will

flash and the display will show the remaining cooking

time.

2. Press button “ ” until the display shows “0:00”.

After 5 seconds the pilot lamp will go out and the

display will revert to the time of day.

“End of cooking” function

With this function, you can set the oven to switch off

automatically when a programmed end of cooking time is

over. Place food in the oven, select a cooking function and
adjust the cooking temperature. Press button
repeatedly to select the “End of cooking” function. The

relevant pilot lamp

will start flashing. Then, proceed as

follows:
To set the end of cooking time:
1. Press button “ ” or “ ”.

2. After the setting is carried out, wait for 5 seconds: the

“End of cooking” pilot lamp

will come on and the