WolfVision VZ-8light 3 - Handbuch (Seite 11)

10
A computer can be connected to the External RGB input (#15) of the Visualizer. With the
EXTERN switch (#30 or #44) a user can switch between the Visualizer image and the image
of the external input to be displayed to the audience.
The signal from the computer is only looped through the Visualizer and is not processed in
any way. In order to avoid that your projector or monitor adjusts itself when switching, it is
recommended that you set the output of the computer to the same signal format and vertical
frequency as the Visualizer.
Please note that the image from the External RGB input (#15) can be displayed on the RGB output (#17) only.
1 - T.M.D.S. Data2- 9 - T.M.D.S. Data1- 17 - T.M.D.S. Data0-
2 - T.M.D.S. Data2+ 10 - T.M.D.S. Data1+ 18 - T.M.D.S. Data0+
3 - T.M.D.S. Data2/4 Shield 11 - T.M.D.S. Data1/3 Shield 18 - T.M.D.S. Data0+
4 - T.M.D.S. Data4- (*) 12 - T.M.D.S. Data3- (*) 19 - T.M.D.S. Data0/5 Shield
5 - T.M.D.S. Data4+(*) 13 - T.M.D.S. Data3+ (*) 20 - T.M.D.S. Data5- (*)
6 - DDC Clock 14 - +5V Power 21 - T.M.D.S. Data5+ (*)
7 - DDC Data 15 - Ground (return for +5V, 22 - T.M.D.S. Clock+
8 - Analog Vertical Sync (**) HSync and Vsync) 23 - T.M.D.S. Clock-
16 - Hot Plug Detect 24 - Analog Vertical Sync (**)
*...not used
**...not available
DVI PORT
Anti-theft device 2: table lock bolt
EXTERNAL INPUT - EXTERN
The Visualizer can be fixed with a , so that it can
not be stolen. Follow the instructions from the cable lock manual.
® security cable T-bar lock (Kensington Lock)
Anti-theft device 1: T-bar lock
Pin 24
Pin 8
Pin 1
Pin 9
Pin 17
table
(sectional view)
washer 6.4/17x3
screw M6
115
1 [4 /
2
"]
156
1
[6
/ 8
"]
M6
Please note that the usable depth
of thread is 8mm, do not screw in
more than this.
The Visualizer can also be fixed onto a table with the
supplied table lock bolt in order to minimize the risk of theft.
The thread to fix the bolt is on the bottom of the unit.
Supplied accessories for anti-theft device (part number):
Socket head cap wrench 5mm (101684)
Screw DIN 912, M6x35 Zn (101689)
Screw DIN 912, M6x50 Zn (101690)
Washer DIN 125A 6.4/12x1.6 (101691)
Washer DIN 7349 6.4/17x3 (101692)
Assembly instructions VZ-8³ (101693)
washer 6.4/12x1.6