WolfVision VZ-8light 3 - Handbuch (Seite 16)

1. Remove the power cord of the Visualizer
2. Open the cover screw by using a coin
3. Turn down the lamp inclusive lamp cover
CAUTION: LAMP CAN BE HOT!
4. Change the lamp
Place the new lamp very carefully into the
socket
5. Mount the lamp cover in reverse order (3 to 1).
If you want to work with more than one Visualizer in the same room, the units should be set to
different infrared codes, in order to control them all individually.
To change the IR code, enter the "Misc. Settings" and set the "IR Code"
to A, B, C or D (code A is default). To change the IR code on the remote control, simultaneously
press PRESET 1, PRESET 2
and ZOOM TELE
ress PRESET 1, PRESET 2 and
ZOOM WIDE
on-screen menu, go to
(#33) (#31). Each time this key combination is
used, the code switches from A to B, C, D ... A ...in the given order.
For resetting the remote control to code A, simultaneously p
.
The LED shows the selected code (it flashes one time for code A, two times for code B, three
times for code C and four times for code D).
If the Visualizer can only be controlled from a close
distance, or if it cannot be controlled at all with the infrared
remote control, you may have to change the batteries.
Open the cover on the back of the remote control and
replace the two 1.5 V AA batteries with new ones.
Check the polarity of the batteries!
15
MAINTENANCE
Changing the Lamp of the Visualizer
Infrared Remote Control VZ-8plus³ only
Different IR Codes VZ-8plus³ only
Cabinet: Clean the cabinet by gently wiping it with a soft, lint freecloth.
Lenses: Clean the lenses by gently wiping with a soft, lint free cloth (do not use a paper
tissue!). Clean by breathing on the lens to create moisture then wipe with lint free
cloth (If need be, use a special optical cleaner only!).
Never use strong cleaning agents such as acetone or benzene!
These substances can damage the surface and the anti-reflex coating!
Cleaning
front back (open)
-
+
-
+
X X
MENU
WIDE TELE
1 2 3 A A
MEMORY
1 2 3
4 5 6
7 8 9
POWER
LASER
PRESETS IMAGE TURN
FREEZE
FOCUS
HELP
ALL IRIS
WHITE
AF
EXTERN
LIGHT
Lamp type: High Frequency Lamp 9W at 10'000 h average burning life.
WolfVision part no. 100040
Please note that an infrared remote control can only be used up to a certain distance from the
unit. Objects situated between the Visualizer and the infrared remote control, and weak
batteries, interfere with reception.