WolfVision VZ-8light 3 - Handbuch (Seite 13)

12
Please note, that the PAL/NTSC video outputs (composite and s-video) are switched OFF by
default. This is because the picture quality of these outputs is MUCH LOWER then the quality of
the DVI and RGB outputs, due to the limitations of the PAL/NTSC video technology. WolfVision
wants to prevent that customers accidentally use an output with lower picture quality as the
main image output. If you want to use the PAL/NTSC video outputs, switch them on with the
following key combination:
PAL: Simultaneously press both FOCUS keys (#27) on the camera head and the
Preset 1 key (#33) on the remote control
NTSC: Simultaneously press both FOCUS keys (#27) on the camera head and the
Preset 2 key (#33) on the remote control.
The video outputs can also be switched between PAL, NTSC and OFF in the on-screen menu.
PAL/NTSC Video Output VZ-8plus³ only
The complete serial protocol can be found on our internet website under:
www.wolfvision.com/support
The serial port (#21) can be used to control the Visualizer through an external device, such as a
room control system that are used to integrate conference rooms.
Pins: 2: RX, 3: TX, 5: GND
Baud Rate: 9200, 19200, 38400, 57600 or 115200 (selectable)
databits: 8, stopbit: 1, parity: no
The baud rate can be changed in the on-screen extra menu (see page 13).
USB Port
RS-232, Serial Control Input
9-pin D-Sub connector
on unit male
(front side)
5
9
2
7
3 4
8
1
6
The USB device port can be used for direct connections between the Visualizer and a
computer. This way, a Visualizer can be controlled and can be used as a scanner for 3-
dimensional objects. Images in JPG, TIF or BMP format can be taken in a fraction of a second -
much faster than with a desktop scanner.
WolfVision's USB Software (Connectivity Software) works under Windows 2000, XP, Vista and
7 (32 and 64-bit) as well as Apple Macintosh. It is fully TWAIN/WIA compatible. This is important
when using Visualizers in connection with graphic programs such as Photoshop, or for
connecting them to Interactive Whiteboards (Smart Boards).
The fast USB 2.0 port can also output live motion. WolfVision‘s Connectivity Software can store
AVI files and includes a video capture driver. You can view and save the live image from the
Visualizer on your computer in almost every modern video editing software.
Please download the latest version of the WolfVision Connectivity Software from:
www.wolfvision.com/support.
(#20)