WolfVision EYE-12 User Manual - Handbuch (Seite 11)

For regular use of the EYE-12, it is not necessary to go into the unit's menu and change settings.
Inexperienced users should not make any adjustments there.
To enter the on-screen menu press the MENU-key (#16) for one second. Settings of the EYE-12 basic
functions can be made here using the 4 SELECT-keys (#22) (the numerical keys with red arrows).
If more information for a function in the on-screen menu is required, set the cursor in the respective line and
press the HELP key (#23) (on the remote control the numerical key Number 5). A detailed description of this
function appears on the screen. If you want to reset the selected item to the default setting, press the
HELP-key (#23) for 2 seconds.
By pressing the MENU-key for 4 seconds the Extra Menu appears.
In the Extra Menu, settings like baud rate can be changed.
The functions of the on-screen menu are not described in detail in this user manual since the HELP menu is
an integrated part of the unit's software (firmware). The information you see on your screen always belongs
to the current firmware.
In the "Power Control" settings of the on-screen menu you can select that the EYE-12 will be automatically
switched off after a certain amount of time.
If the picture or the colors on your screen appear to be too dark, you can lower the overall contrast of the
picture in the "Color Settings" menu of the on-screen menu. The settings can be made separately for the
normal mode and the text mode.
All settings in the on-screen menu can be set back to the factory defaults. "Reset" is a category in the on-
screen menu. In case you not able to read the menu on the screen you can also set the unit back to the
factory defaults by simultaneously pressing both FOCUS-keys on the unit (#27) and the Number 4-key
(back-arrow, #22) on the remote control.
If you only want to reset the item that is currently selected to the default setting, press the HELP-key (#23)
for 2 seconds!
The output image of the EYE-12 can be switched from positive to negative in the on-screen menu. In
addition, the background of a negative image can be switched to blue for better readability of text. You can
also switch between color or black and white in the on-screen menu.
TIP: If you often switch to negative, negative/blue or black/white images, you can assign this function to one
of the Preset keys (see page 7) in the on-screen menu.
The following chapter is for experienced users only:
ON-SCREEN MENU / ON-SCREEN HELP
Switching To Negative, Negative/Blue and Black/White
Changing the Standard Contrast (Color) Settings
Auto Power-off
Reset On-Sreen Menu Settings
10
Open „Device Info” in the sub menu „Advanced Settings” to view details of the unit.
Device information und Firmware version