WolfVision EYE-12 User Manual - Handbuch (Seite 15)

If you want to work with more than one EYE-12 in the same room, the units should be set to different infrared
codes, in order to control them all individually.
To change the IR code, enter the "Misc. Settings" and set the "IR Code" to A, B, C or
D (code A is default). To change the IR code on the remote control, simultaneously press PRESET 1,
PRESET 2
and ZOOM TELE
ress PRESET 1, PRESET 2 and ZOOM WIDE
LASER indication LED (#30)
on-screen menu, go to
(#28) (#20). Each time this key combination is used, the code switches from A
to B, C, D ... A ...in order given.
For resetting the remote control to code A, simultaneously p
.
The shows the selected code (it flashes one time for code A, two times for
code B, three times for code C and four times for code D).
Please note that an infrared remote control can only be used up to a certain distance from the unit. Objects
situated between the EYE-12 and the infrared remote control, and weak batteries, interfere with reception.
14
MAINTENANCE
Infrared Remote Control
Different IR Codes
Cabinet: Clean the cabinet by gently wiping it with a soft, lint free cloth.
Lenses: Clean the lenses by gently wiping with a soft, lint free cloth (do not use a paper tissue!). Clean by
breathing on the lens to create moisture then wipe with a lint free cloth (If need be, use a special
optical cleaner only!).
Never use strong cleaning agents such as acetone or benzene!
These substances can damage the surface and the anti-reflex coating!
Cleaning
front back (open)
-
+
-
+
X X
A A
FOCUS
ALL
WIDE TELE
1 2 3
MEMORY
1 2 3
4 5 6
7 8 9
POWER
LASER
PRESETS IMAGE TURN
FREEZE IRIS
AF
MENU
WHITE
HELP
The software (firmware) of (including the o ) can easily be upgraded to the latest
version. The firmware update can be done via USB, Ethernet (LAN) or RS232.
Firmware update files can be downloaded for free at www.wolfvision.com/support.
Updates can be done with the WolfVision Connectivity Software.
For a RS232 connection, use a crossed serial RS232 cable (Null modem cable).
the EYE-12 n-screen HELP
Please download the latest version of the WolfVision Connectivity Software from:
www.wolfvision.com/support
Firmware Upgrades
If the EYE-12 can only be controlled from a close distance, or if it cannot
be controlled at all with the infrared remote control, you may have to
change the batteries.
Open the cover on the back of the remote control and replace the two
1.5 V AA batteries with new ones.
Check the polarity of the batteries!