WolfVision EYE-12 User Manual - Handbuch (Seite 20)

An lightbox (bottom light) is recommended for dark
transparent material such as x-rays or for very small
transparent material such as slides.
When a lightbox is used, the room light may should be
dimmed or switched off.
When light conditions change, a white balance adjustment
should be performed to compensate the varying color
temperatures of different light sources (see page 7).
WolfVision offers lightboxes for x-rays,
slides and transparencies in two sizes:
LB-38: 430 x 359 mm (16.9" x 14.1")
LB-9: 300 x 210 mm (11.8" x 8.3")
Details at: www.wolfvision.com
Lightbox (optional)
The Ceiling Tile Bridge is designed to help install the EYE-12
Camera into a standard grid of a suspended ceiling ( 2’ x 2’ or
2’ x 4’).
The Tile Bridge is made of aluminium to insure a light but
sturdy construction. It fits standard ceiling grids in American
and European sizes.
The EYE-12 is attached to the Tile Bridge via a camera
mount. The mount can be rotated 360 degrees and moved
across the Tile Bridge, in order to align the camera with the
working surface.
A white trim ring is included to dress up the ceiling tile once
the EYE-12 is properly adjusted and in place.
Tile Bridge (optional)
Using the optional Close-Up Lens can be used to focus on
objects at a close distance to the EYE-12.
Technical Data: High-resolution achromatic lens
Focus range:
310-460mm
Focal distance: f=477mm
Lens diameter: 50mm
Attachment thread: M46 x 0.75
Weight: 54g
Close-Up Lens (optional)
Information on some accessories from other manufacturers which can be used with the EYE-12 is available
at: www.wolfvision.com/wolf/thirdparty.html
19
Accessories from other manufacturers
The Working plate has crystalline white surface for perfect
reproduction of transparencies and reflecting material like
photos or glossy brochures.
The working plate is 12° inclined in order to avoid reflections.
Inclined working surface (optional)
Size: 320 x 430 mm (12.6" x 16.9")
Height: 10-40 mm (0.4"-1.6") at 12°