WolfVision VZ-9plu - Handbuch (Seite 10)

9
The Visualizer offers the possibility to store the current settings
as a preset and recall them by just pressing the respective
PRESET key (#34) on the remote control.
The Preset 1 can be recalled by pressing the FREEZE key (#30) on the camera head for 2
seconds.
For storing a reset adjust y function as required and then PRESET
key for 2 seconds . An on-screen message inform you
when the reset is stored.
When presets are stored as mentioned above, all current settings such as zoom, focus, iris
etc. are stored.
"N ", "B " etc. to a PRESET key
in the on-screen menu of the Visualizer (see page 14).
p : an press any one of the
s on the remote control or more will
p
The presets can also be stored in the on-screen menu.
Contrary to this, a user also has the opportunity to assign only specific
functions such as "TEXT", "LIGHT", EGATIVE LACK/WHITE
Correct white balance adjustment is important for exact color reproduction.
This
means that the white balance is continuously adjusted automatically.
For an exact white balance, 10% of the recorded image should be white (measurement
area is in the center of the image).
For a precisely fixed white balance adjustment use the "One Push" white balance. This can
be done by completely zooming in on a white sheet of paper on the working surface and
pressing the LIGHT key (#25) for 2 seconds. When the white balance is stored, an on-
screen message appears. Setting a "One Push" white balance switches off the "Auto
Tracking" mode (when the unit is switched off and on again the
When the lighting conditions change (e.g. light box, sunlight or different
room light) the white balance should be readjusted!
For specialists:
If you work with negative transparencies and a light box, use a blank
(black in the image) piece of the negative film for white balance adjustment!
The “One Push” white balance will be separately adjusted and stored for top light and external light box
.
"Auto Tracking" is the default white balance setting when the Visualizer is shipped.
"Auto Tracking" mode will
be reactivated).
The Visualizer can be switched between "Auto Tracking", "One Push" and "Manual" white balance
mode in the on-screen menu (see page 14)
(if available)
White Balance
Preset Function
Please note that objects with very low contrast (like blank sheet of paper) are difficult to
focus. If the autofocus does not work just move the object slightly.
For special applications the autofocus can also be switched off using the on/off switch
. The autofocus is also switched off when the manual FOCUS keys are
used.
(#29
or #37) (#28 or #38)
Please note that the
oom mode.
Still pictures in the memory can also be digitally zoomed
You can change the behavior of the Visualizer in the digital zoom mode in the on-screen menu (see page 14).
Visualizer has an optical 12x zoom. The digital 4x zoom increases the
overall zoom range to a 48x zoom. The smallest pickup size on the working surface without
digital zoom is 33 x 25mm (1.3" x 1"). When you zoom in further the digital zoom is
automatically activated and the smallest pickup size is 8 x 6mm (0.3" x 0.25"). However
please be aware that when the digital zoom is used, the resolution of the picture is not as
good as before. The default setting displays a message on-screen when you are in the
digital z
.
Digital Zoom
Autofocus