WolfVision VZ-9plu - Handbuch (Seite 8)

1. Connect the power pack to the power-input (#23).
2. Connect your display device (projector, monitor, video
conferencing unit etc.) to the appropriate output of
the Visualizer (#18, #19, #20 or #21).
IMPORTANT:
For choosing the right output please read the
detailed description on page 13!
3. Pull the arm upwards using the pull pad (#6).
Camera head and light automatically move into the
working position. The VZ-9plus is switched on
automatically.
Power-on preset:
The power-on preset is automatically activated when switching on the unit.
The settings are: zoom size: approx. 20 x 15 cm (DIN A5), autofocus: on, auto iris: on.
Setting Up the Visualizer
The working surface of the Visualizer (#10) has a special crystalline white color,
which is especially designed for perfect reproduction of transparencies.
In the following cases, an optional lightbox is recommended:
- If the transparency is very dark
- If the transparency is very wavy and causes reflections
- If the room light causes reflections on a transparency
Working Surface
7
Slide
Place the slide onto the built-in light field, turn the camera
head until the slide is in the middle of the recorded image
and switch it on using the LIGHT key (#25). The camera
zooms the slide automatically in. The camera automatically
focuses on the slide.
Light Field For Slides
The built-in LCD monitor makes positioning of objects very
easy and eliminates the need for an additional control
monitor. This monitor can show different signals, like
“external in”-image, stored-image or life-image (selectable
in the on-screen menu - see page 14). The on-screen
menu is also visible on this LCD monitor. The brightness of
the LCD-monitor is adjustable in the on-screen menu.
Built-in LCD Monitor
Monitor