Festo Линейные модули HMP - Handbuch (Seite 22)

HMP−...−B−...−Z..−...
Festo HMP−...−B−...−Z..−... 0412NH English
22
Fitting pneumatic components
S Connect the intermediate position module
type HMP−...−B−...−Z−...Ă.
The recess on the end cover [(B) in Fig. 13]
of linear module type HMP−...−B−... can be
used for passing the compressed air tubĆ
ing (outer diameter 3 mm) to the outside.
Please note
The stop lever can damage the shock
absorber when it moves in or out.
S Make sure that the shock absorber or its
support 3 on the linear module is outĆ
side the swivel range of the stop lever
when the latter moves in or out (e.g. by
means of a control delay device in the
circuit).
The swivel−in speed of the stop lever
exceeds the speed of linear module type
HMP−...−B−...Ă.
Fig. 10
Fig. 11