Festo Пропорциональные распределители MPYE - Handbuch (Seite 23)

Setpoints:
- Setpoint voltage
- Setpoint current
DC 0 ... + 10 V mid-position at 5 V (voltage variant, types MPYE-5-...-010B)
4...20 mA mid-position at 12 mA (current variant, types MPYE-5-...-420B)
Input current
(setpoint) 80 μA at 10 V (voltage variants Types MPYE-5-...-010B
0 μA at 5 V
- 80 μA at 0 V
Input resistance
(setpoint) 300 Ω (with current variant, types MPYE-5-...-420B)
Power consumption:
- Piston mid-position
- Maximum
2 W
max. 20 W
Degree of protection IP 65 with correctly-fitted connector socket as described in "Accessories"
EMC
(housing earthed with
earthing screw and
cable screening earthed at
opposite end from valve) - Immunity to interference as per EN 61000-6-2 (industry)
*)
The following minimum operating quality is guaranted when there is interference from electromagnetic
HF-Fields as per EN 61000-4-3: The piston slide remains within the nominal cover range.
- Interference emission as per DIN EN 61000-6-4 (industry)
*)
Standard nominal flow rate 100 l/min ( ±10 %) 350 l/min ( ±10 %) 700 l/min ( ±10 %) 1400 l/min ( ±10 %) 2000 l/min ( ±10 %)
Max. leakage rate in new
condition (6 bar, outlets 2
and 4 closed) 7 l/min 20 l/min 25 l/min 30 l/min 35 l/min
Hysteresis Max. 0.4% relative to maximum slide stroke
Materials Housing: Anodised aluminium Electronics housing: Galvanised ABS
Seals: NBR Valve slide and sleeve:Hardened aluminium
Screws: Galvanised steel
Weight 0.290 kg 0.330 kg 0.330 kg 0.530 kg 0.740 kg
Fig. 24 *) The MPYE-... is intended for industrial use only.
1304f D/GB 23