Troubleshooting – AEG S83600CSW1 Benutzerhandbuch

Seite 13

Advertising
background image

Defrosting can be accelerated by plac-
ing bowls with hot water (not boiling) in-
side the freezer.
• Loosen the drainage channel from its

resting position, push it in according
to the illustration and place it in the
bottom freezer drawer where water
can collect

• Carefully scrape off the ice when it

starts to thaw. Use a wood or a plastic
scraper.

• When all the ice has melted, clean and

wipe the cabinet dry, then put the
drainage channel back in place.

• Switch on the cabinet and replace the

frozen foodstuff.

It is recommended to operate the ap-
pliance at the highest position of the
thermostatic control for some hours
so that it can reach the sufficient stor-
ing temperature as soon as possible.

Never use sharp metal tools to
scrape off frost from the evapo-
rator as you could damage it. Do
not use a mechanical device or
any artificial means to speed up
the thawing process other than
those recommended by the
manufacturer. A temperature rise
of the frozen food packs, during
defrosting, may shorten their
safe storage life.

7. TROUBLESHOOTING

CAUTION!
Before troubleshooting, discon-
nect the power supply.
Only a qualified electrician or
competent person must do the
troubleshooting that is not in this
manual.

There are some sounds during
normal use (compressor, refriger-
ant circulation).

Problem

Possible cause

Solution

The appliance is
noisy.

The appliance is not sup-
ported properly.

Check if the appliance
stands stable (all the four
feet should be on the
floor).

The compressor op-
erates continually.

The Temperature regula-
tor may be set incorrectly.

Set a warmer temperature.

The door is not closed
correctly.

Refer to "Closing the
door".

The door has been
opened too frequently.

Do not keep the door
open longer than necessa-
ry.

The product temperature
is too high.

Let the product tempera-
ture decrease to room
temperature before stor-
age.

ENGLISH

13

Advertising