AEG S83600CSW1 - Handbuch (Seite 17)

9.6 Removing the shelf
holders
A
B
C
Your appliance is equipped with shelf re-
tainers that make it possible to secure
the shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direc-
tion of the arrow (A).
2. Raise the shelf from the rear and
push it forward until it is freed (B).
3. Remove the retainers (C).
9.7 Door reversibility
WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the
doors of the appliance during
the operations.
1.
Open the doors. Unscrew the mid-
dle hinge (m2). Remove the plastic
spacer (m1).
2. Remove the spacer (m6) and move
to the other side of the hinge pivot
(m5).
3. Remove the doors.
4. Remove the left-hand cover pin of
the middle hinge (m3,m4) and move
to the other side.
5. Fit the pin of the middle hinge (m5)
into the left-hand hole of the lower
door.
6.
Remove using a tool the cover (b1).
Unscrew the lower hinge pivot (b2)
and the spacer (b3) and place them
on the opposite side.
7. Re-insert the cover (b1) on the oppo-
site side.
m1 m2
m3 m4
m5
m6
b1
b2
b3
ENGLISH
17