AEG BP8615001M - Handbuch (Seite 28)

agents, sharp-edged objects or a dish-
washer. It can destroy nonstick coat-
ing.
Stainless steel or aluminium ap-
pliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials, as they can
cause damage to the oven sur-
face. Clean the oven control pan-
el with the same precautions.
12.1 Shelf supports
You can remove the shelf supports to
clean the side walls.
Removing the shelf supports
1. Pull the front of the shelf support
away from the side wall.
2
1
2. Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
The rounded ends of the shelf
supports must point to the front.
12.2 Pyrolysis
CAUTION!
If a hob is installed with the ap-
pliance, do not use it at the same
time as the Pyrolysis function. It
can cause damage to the appli-
ance.
For steam models only: before
you start the cleaning procedure,
make sure that the water tank is
completely empty. Refer to
“Emptying the water tank”.
Remove all accessories from the
appliance.
28 www.aeg.com