Lenze DDS v2.1 - Handbuch (Seite 35)

Drive PLC Developer Studio
L
33 DDS DE/EN 2.1
4.4.2 Determine communication parameter
Before loading the multi-storey car park programm into the connected target systems you have to set
the parameters for this project.
• Select Online ➞ ➞ ➞ ➞ Communication parameter, to open the dialog box
Communication parameter:
The dialog box Communication parameter enables the user to build up and administer the channels for
the automation system.
Tip!
The parameters set for CAN bus node address and Can bus baud rate must be identical with the
settings for the automation system.
• CAN bus node address = Code C0350
• CAN bus baud rate = Code C0351
The setting of the parameter channel and baud rate can be carried out with the system bus
configuration tool or directly in the DDS.
Show/Hide Bookmarks