Lenze GDC easy getting started - Handbuch (Seite 40)

Global Drive Control easy
L
38 GDC easy DE/EN 2.0
2 System requirements
The following minimum requirements on hardware and software must be met in order to use GDC:
·
Microsoft © Windows © 98/Me, Windows NT © 4.0 (as of Service Pack 5),
Windows 2000 (as of Service Pack 2) or Windows XP
·
IBM compatible PC with Intel © Pentium © −333 processor
·
128 MB RAM
·
180 MB free hard disk capacity
·
CD−ROM drive
·
Free ports according to the requirements of the fieldbus connection module used
We recommend to use a mouse.
2.1 Ports supported by Global Drive Control
The communication with the target system (controller, Drive PLC, etc.) requires a fieldbus−specific
interface module for the PC and the corresponding fieldbus modules for the drives to be connected.
The following table gives an overview of the transfer media which are supported by GDC.
Bus system PC port Max. number
of target
systems Required
hardware components
System bus
(CANopen) Parallel port
(LPT port) 63 PC system bus adapter 2173
incl. connection cable and voltage−supply adapter
·
for DIN keyboard connection (EMF2173IB)
·
for PS/2 keyboard connection (EMF2173IBV002)
USB
(Universal
Serial Bus) PC system bus adapter 2177
incl. connection cable
(EMF2177IB)
LECOM Serial port
(COM port) 1
(RS232)
·
Fieldbus module EMF 2102IB V001 or V004
·
PC system cable RS232/485, 5m (EWL0020)
31
(RS485)
·
Fieldbus module EMF 2102IB V001
·
PC system cable RS232/485, 5m (EWL0020)
·
Interface converter RS232/RS485 with automatic reversal
(not available from Lenze; for sources of supply see
appendix). (
^ 64 )
52
(optical fibre)
·
Fieldbus module EMF 2102IB V003
·
Optical fibre adapter (EMF2125IB)
·
Power supply for adapter (EJ0013)
·
Optical fibre cable (EWZ0007)
Other
bus systems Field bus specific PC interface module with OPC bus server according to DRIVECOM
specification.
·
For comprehensive information on the use of GDC as OPC client refer to the appendix. ( ^
60 )
Connect the target system with the PC via the suitable interface PC connection module to
communication with the target system in the GDC online mode.
·
Information on the connection can be obtained from the operating instructions of the field bus
module or the PC interface module.