Lenze GDC easy getting started - Handbuch (Seite 58)

Global Drive Control easy
L
56 GDC easy DE/EN 2.0
4.8.7 Input dialogs
All input dialogs have the following four buttons:
Ok The selected/entered value is accepted, the input dialog is completed.
·
In online mode the value is transferred to the target system.*
Acceptance The selected/entered value is accepted, the input dialog remains open.
·
In online mode the value is transferred to the target system.*
Cancel The input dialog is completed without accepting changes.
·
Exception: The changes were already accepted by clicking the button Acceptance .
Help The online help with information on the selected parameter is opened.
* Some parameters can only be changed in online mode if the controller has been inhibited in the target system.
The representation of the parameter value depends on the type of parameter:
Selection (list)
You can select a new setting for the
selected parameter from a list.
·
The currently set value is selected in
the list when the input dialog is
opened.
Bit−coded
The parameter value is bit−coded.
·
All bits and their meanings are listed.
·
You can toggle between 0 and 1 with
the left mousebutton or the space bar.
·
Alternatively , you can enter the
parameter value either as a decimal
or hexadecimal value.
Decimal
You can enter the parameter value within
a displayed range with the keyboard.
·
For some parameters, the input dialog
offers additionally the buttons Up and
Down to change the parameter value
in fixed increments.