Lenze GDC easy getting started - Handbuch (Seite 47)

Global Drive Control easy
L
45 GDC easy DE/EN 2.0
4.5 Assign AIF module to the basic controller
If an AIF module is connected to the basic controller and the PC ótarget system communication is
via this AIF module you can load the controller description assigned to the AIF module. This allows you
to parameterize the AIF module with GDC as well.
Automatic assignment in online mode
In the online mode, an available AIF module is identified automatically and listed in the window "Drives
connected to bus".
( ^ 53)
·
By clicking with the right mousebutton on the AIF module entry the command Manipulate AIF
is available which you can call via the dialog box Assign AIF module to the basic controller (see
next paragraph "Manual assignment in offline mode).
Manual assignment in offline mode
In offline mode, you can assign the AIF module via the dialog box Assign AIF module to the basic
controller which you call with the button Next in the dialog box Assign device description to the basic
controller .
( ^ 44)
·
Select the AIF module from the list field AIF module for ... from the list:
Fig. 10 list field AIF module for ... in the dialog box Assign AIF module to the basic controller
Tip!
If the PC is not connected to the basic controller via the AIF module interface
− or −
no AIF module is connected to the basic controller, select the entry "No AIF module/keypad".