Lenze GDC easy getting started - Handbuch (Seite 49)

Global Drive Control easy
L
47 GDC easy DE/EN 2.0
4.6 Assign FIF module to the basic controller
If one or more FIF modules are connected to the basic controller you can load the corresponding
controller descriptions so that you can parameterize the FIF modules with GDC as well.
Automatic assignment in online mode
In the online mode, an available FIF module is identified automatically and appears in the dialog box
Assign FIF module to the basic controller as "selected".
·
If a FIF module other than the automatically selected one should be connected to the basic
controller, you can assign the module manually.
(see next paragraph "Manual assignment in offline mode).
·
By clicking the button Complete or Next you accept the selection.
Manual assignment in offline mode
In the offline mode, you can assign the FIF module via the dialog box Assign FIF module(s) to the basic
controller which you call with the button Next in the dialog box Assign AIF module to the basic controller.
( ^ 45)
·
Select the FIF module from the list field FIF module for ... from the list:
Fig. 11 List field FIF module for ... in the dialog box Assign FIF module to the basic controller
Tip!
·
If no FIF module is connected to the basic controller, select the entry "No FIF module".
·
If the basic controller has several FIF interfaces click the button Next to proceed with the
assignment of the other FIF modules.