Gossen DIGISKY - Handbuch (Seite 17)

GOSSEN Foto- und Lichtmesstechnik GmbH 17
6.2 Flash Light Reading
– NonCord / Cord / Radio
Flash measurement is possible with all diffuser settings (incident light or reflected light
measurement).
Flash can be measured with or without a synchronizing cable, and with radio triggering
(cord, non-cord, radio). If a cord or radio trigger is used, the flash will be triggered and
measured automatically by the M key.
6.2.1
Flash Light Reading
– Measurement
Use the ring controller ...
to select the desired
synchronization speed.
Press the measurement
key to perform
measurement.
Non-Cable
Waiting
The flash is on standby for roughly 45 seconds. The flash unit must
be triggered manually during this time. Readiness for measurement is
indicated with an icon and
Waiting in the “f-stop window”.
Cord
Flash is triggered.
Radio
Radio
Use the data and the ring
controller
to select flash groups
All / ST
G1 to G4 (Elinchrom)
A to D (Phottix)
LP 1 to LP40 (Broncolor)
M
Radio trigger is activated in Menu – User (Cam 1 to 3) – RF Module and RF Channel, adapted
to the respective user (see page 26).
!
Cable
In order to trigger your flash unit with the measurement key (M),
connect it to the DIGISKY
using your flashgun’s cable.