Gossen DIGISKY - Handbuch (Seite 4)

GOSSEN Foto- und Lichtmesstechnik GmbH 4
Contents Page
8 Main Menu
8.1 Overview 25
8.2 Navigation - Setup 25
8.3 User Settings 27
8.3.1 User Selection 27
8.3.2 ISO Speed – Setting Film Speed 27
8.3.3 EV Steps - Gradation 27
8.3.4 RF Module (Photo Only) - Radio Module
– Type Selection
28
8.3.5 RF Channel (Photo Only) - Radio Channel - Channel Setting 28
8.3.6 Filter Compensation - Filter Value - Setting Correction Values 28
8.3.7 Cine Speeds (Movie Only) - Frame Rates 28
8.3.8 Shutter Angle (Movie Only) - Sector Angle 28
8.3.9 Photometry (Movie Only) - Illuminance / Luminance 29
8.3.10 Menu Reset - Delete User Settings 29
8.4 Meter Settings 29
8.4.1 LCD Brightness
– Display Brightness
29
8.4.2 Display Off - Display On-Time 29
8.4.3 Power Off - Standby Time 29
8.4.4 Language - Country Settings 30
8.4.5 Information 30
8.4.6 Restart Defaults - Standard Values - Delete Meter and User Settings 30
9 Practical Notes 31
10 Technical Data 33
11 Interface 35
11.1 Update 35
12 Service 35
13 FCC and IC Declaration 36
14 EC Declaration of Conformity 37
Users of E
linchrom „RX- and BX flashes“ are recommended to use the DIGISKY
software version 2.xx which include the enhanced radio control functions for flash
heads power control. The software, update program and update instructions can be
downloaded from the GOSSEN website (
www.gossen-photo.de ).
The specific functionality is described in part 2 of the operating instructions -
Additional “Elinchrom” Radio Control which is also available on the GOSSEN
website and can be downloaded as well.