Gossen DIGIPRO F2 - Handbuch (Seite 38)

10 GOSSEN Foto- und Lichtmesstechnik GmbH
1.2 Duration of display
If for approx. 2 minutes none of the buttons of the DIGIPRO F2 is pressed, the meter will be switched
off automatically. The measuring and setting values stored in the memory will be maintained.

The stored values can be recalled by depressing the function or value buttons

New measurement is instantly possible when the metering button is depressed.
The values of the last meter reading are stored until a new meter reading is taken.
The DIGIPRO F2 is fitted with separate memories for ambient light and flash measurement.
2 DIGIPRO F2 functionality
2.1 Preparations
Battery
The DIGIPRO F2 operates with a 1.5 V AA-type battery (alkaline-manganese battery). Since the
meter’s power consumption is minimal, the battery will last for a long time. When the battery’s capacity
becomes exhausted, the BAT symbol appears on the display as a warning that the battery has to be
replaced at the earliest possible opportunity. Measurements cease to be possible if the display only
indicates BAT. The battery must be immediately replaced.
To change the battery, open the battery compartment of the DIGIPRO F2. Remove the exhausted
battery and insert the new one. Ensure correct polarity
„+“ and „–“! Push back the battery compartment
cover. Battery changing deletes all stored values.