Gossen DIGIPRO F2 - Handbuch (Seite 44)

16 GOSSEN Foto- und Lichtmesstechnik GmbH
3.2.3 Shutter priority mode
– Ambient light measurement

Select with the function buttons (the last stored value appears
in the display)

Adjust the desired shutter speed with the value buttons

Measure by pressing the measuring button M
The measured aperture appears in the left-hand digital display
(accuracy: 1/10 stops), also as a rounded mark in the analog aperture scale

Select alternative aperture/shutter speed combinations with the value buttons.
3.2.4 Contrast measurement

Select t with the function buttons

Keep the measuring button M pressed while aiming the meter at
various areas of the subject. The analog aperture scale displays
the f-stop series between the two extreme values, and with the
actual measured value flashing. The first measured f-stop is
displayed in the left-hand side of the display. It remains displayed
as a reference value (e.g. of a grey card).

After the measuring button is released, the entire measured contrast range is displayed on the
analog aperture scale, and the last measured value will cease to flash.