Gossen DIGIPRO F2 - Handbuch (Seite 54)

26 GOSSEN Foto- und Lichtmesstechnik GmbH
Ambient light measurement
Shutter priority mode

Select t with function buttons and set desired
shutter speed with value buttons

Measure by pressing the M button

The measured aperture appears
Contrast measurement

Select t with the function buttons

Keep the M button depressed while aiming the
meter at various areas of the subject

After the measuring button is released, the
entire measured contrast range is displayed on
the analog aperture scale
Aperture priority mode

Select f with the function buttons and set the
desired aperture with the value buttons

Measure by pressing the M button
The measured shutter speed appears in the
right-hand digital display
Exposure value

Select EV with the function buttons

Measure by pressing the M button

The measured exposure value appears in the
left-hand digital display
Setting the film speed

Select ISO with the function buttons and adjust
the required ISO value with the value buttons
Measuring function
Flash readings

Readings can be taken with or without
synchronizing cable

Select with the function buttons
Adjust the desired synchronizing speed with
the value buttons
(1 s to 1/1000 s; including 1/90)

Press the measuring button M and trigger the
flash

The measured aperture stop appears in the left
digital display and as a flashing mark on the
analog aperture scale. The aperture stop for
the level of ambient light is additionally
indicated on the analog aperture scale