Gossen DIGIPRO F2 - Handbuch (Seite 41)

GOSSEN Foto- und Lichtmesstechnik GmbH 13
3 The individual functions
3.1.1 Setting the film speed

Select ISO with the function buttons

Adjust the required ISO value with the value buttons
(display left: DlN value, right: ISO value)
Once the film speed has been set, it is transferred to the memory
of the DIGIPRO F2 and maintained when the meter is set to any operation function. It remains visible
on the top right-hand side in the digital display.
Any change of the film speed directly influences the stored paired aperture and shutter speed values.
The selected film speed is retained in the memory until it is changed in the described manner.
3.1.2 Pre-selection of f-stop series and time series
It is possible to pre-select the f-stop settings and the exposure
times in 1/1, 1/2 or 1/3 values. First press the function ISO (see
below) and simultaneou
sly both function keys “<>”, then use the
value key to switch between
„dEv 0.3“ (1/3), „dEv 0.5“ (1/2) and
„dEv 1.0“ (1/1).