HK Audio LipaN V1.2.0.4 - Handbuch (Seite 4)

4
The Groups Popup Menu
Right-clicking a controller icon in the GROUPS box at the bottom left
opens a context menu offering the following option:
REMOVE CONTROLLER FROM GROUP
Selecting this menu option removes a controller from a group. If you
select it, a confi rmation prompt appears to let you know this controller’s
outputs will be muted if you remove it from the group.
3.2 Menu Options
File Controller Network View ?
New Save Filters to
Controller Rescan
Network Meter-
bridge About
Open Save Scenes to
Controller Go offl ine Admin
View Help Topics F1
Save Save Scenes to PC
Save as.. Update Firmware
No Recent
Files Update Scene +
Filter Libr.
Exit
A look at subordinate menu options
File menu options:
• New: Quits and opens a new LIPAN mask. All unsaved settings will be
lost!
• Open: Loads a previously saved LIPAN mask.
• Save: Saves the current LIPAN mask in an existing fi le.
• Save as: Saves the current LIPAN mask in an existing fi le under the
name and target folder of your choice.
• Exit: Quits the LIPAN application. Unsaved settings will be lost.
Controller menu options:
• Save Filter to Controller: Loads an individual fi lter to the selected
controller. Select in the FIRNET controller’s fi lter database any memory
slot from 11 to 99 for this purpose.
• Save Scene to Controller: Loads a scene previously stored on a PC
to the FIRNET controller’s fi lter database. Select in the FIRNET
controller’s fi lter database any memory slot from 1 to 10 for this
purpose.
• Save Scene to PC: Saves confi gurations you have created.
• Update Firmware: Launches a fi rmware update.
• Update Scene and Filter Library: Loads scenes and fi lter data banks to
your FIRNET controller.
Network menu options:
• Rescan Network: Starts a new scan, whereby you can defi ne a new
scanning range.
• Going offline: Disconnects all FIRNET controllers from the network.
View menu options
• Meterbridge: Opens the Meter Bridge view.
• Admin-View: Opens the Admin view.
3.3 The Controller Window
(Single Controller View)
Figure 4: The Controller window
To view the window of any given controller, double-click its icon in
the tree of the CONTROLLER or GROUPS box. The tree indicates the
controller by its IP address or name. A Controller window has a fi xed size
and cannot be scaled.
An open Controller window lets you:
• Select the speaker series and fi lter setup in popup menus
• Save and access scenes (ten user presets): You have ten slots available
for saving entire user confi gurations. You can name these scenes and
load them from a list on your PC by clicking the LOAD button.
• View the controller’s IP address, group assignment, and name or name
change
Note: The IP address may be changed at the controller only.
• View phase, mute, delay, and level (indicator and fader) settings for
each channel’s inputs and outputs
• Change the delay unit to meters, milliseconds, feet, or samples for each
channel
Note: This is a global edit affecting all channels and controllers. Delay
values given in units of m and ft depend on the temperature setting ad-
justed under Admin/Utilities/Temperature on the controller. The FIRNET
always stores delay values as samples per ms. It converts the information
given at a sampling frequency of 96 kHz and indicates it as delay time in
ms. (ms = samples / 96). Then the speed of sound (m = c * ms / 1000) is
factored into the conversion equation. It varies according to temperature,
which is why you must enter the air temperature to the FIRNET to ensure
this conversion yields the correct result.
• View the controller’s assignment to one and only one of the 16 groups.
Multiple assignments would be pointless and are therefore not an
option.
• View AES In, Ext Sync, and Keylock statuses
• Open the Stereo Input EQ for this controller
• View the fi lter in the output channel under the respective Output fader