Gastroback 42636 Design Espresso Machine Advanced Control - Handbuch (Seite 8)

46
• Do not leave the appliance unattended when in use.
• Do not touch hot surfaces. Use handles or knobs. Allow the appliance to cool down before
moving or cleaning any parts.
• Do not place anything, other than cups for warming, on top of the the appliance.
• Always switch off the appliance by pressing the POWER button to ›off‹ and unplug if
appliance is to be left unattended, if not in use, before cleaning, before attempting to move
the appliance, disassembling, assembling and when storing the appliance.
• Keep the appliance and accessories clean. Follow the cleaning instructions provided in
this book.
• The appliance is heated by built-in electric heating elements. The appliance or power
cord may never touch hot surfaces. Do not place the appliance or any part of it on or near
hot surfaces (e.g. burner, heater or oven). Do not use any part of the appliance (e.g. pot,
steamer) with any other device.
• The appliance is designed for brewing espresso and coffee. Therefore, some components,
such as the group head, the portafilter and the steam wand become very hot during opera-
tion and hot water or steam escape.
• Do not operate the appliance with a damaged cord or plug or after the appliance mal-
functions, or has been damaged in any manner. Immediately cease use and contact an
authorised service center for examination, repair or adjustment.
• Do not apply any force during operation to prevent damage to the components.
• DO NOT place the appliance or power cord in an automatic dishwasher.
• Do not leave any food dry on the appliance. Always clean the appliance after each use
to prevent a build up of baked-on foods (See: ›Care and Cleaning‹). Always keep the appli-
ance and the accessories clean.
• After you have filled the correct quantity of ground coffee into the porta filter, you should
press the ground coffee as evenly as possible. To do this, use the integrated tamper. The
ground coffee should not be pressed too hard.
• Wipe carefully the rim of the porta filter of any spilled coffee. The rim should be comple-
tely clean so that the porta filter can seal at the brew head pressure-tight. For an optimal
results the pressure gauges should be located in the central zone.
• The moisture content of the coffee grounds in the porta filter, which is due to the special
brewing technology of the machine, represents not a malfunction of the appliance.
• Leave the lid during operation, always on the bean hopper.
• Make sure that the porta filter is firmly inserted before use in the group head. Never re-
move the porta filter during operation.
• Store packaging materiasl out of reach of children.
• Do not operate with carbonated water, but only in soft water (up to 4 ° dH = German
hardness).
• This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;