faytech 15'' IP65 Touch Monitor - Handbuch (Seite 40)

40
USING THE TOUCH FUNCTION
Connect the USB cable to the USB port on your PC (after you have been asked within the
software installation process).
The touch-screen series also supports the use of touch through the serial port. These
functions are suitable and are available for project customers. Please order the faytech special
cable.
DISPLAY OPERATION
THE REMOTE CONTROL
As the +/- buttons on the touchscreen are used to adjust brightness, the remote control
provides the whole menu functionalities like to turn the touchscreen on and off, change the
source signals (AV, VGA), Brightness adjusting, auto calibration and settings like explained in
the following menu. Before using the remote for the first time, please remove the thin plastic on
the back side so that the battery makes contact and the remote control has power.
SETTINGS IN VGA MODE
The Menu operation of the faytech display is simple and logical. Pressing MENU buttons on
the remote control brings up the main settings including color setting, pictures setting, menu
setting and sound settings; with +/- you can navigate through the options. The selected item
will be marked in red. Press MENU again to save the changes .To exit, select EXIT and press
MENU.