Clearaudio Tangent (Tangential) - Handbuch (Seite 19)

Tangent
Bedienungsanleitung / User manual
Page / Seite 19  clearaudio electronic GmbH 2015
Slide the headshell with the cartridge through the proper drill in the carriage of the
tonearm. For this, lift up with the cuing lever that the headshell will be positioned under
the rope of the cueing-lever-unit (as shown in picture). Connect the pins of the tonearm
cable with the corresponding pins of the cartridge. Please take care of the colour codes.
Lock the headshell in this position with the screw on the top of the carriage with the
hex key wrench (#1,5). Take one or more counterweight(s) (it depends on the weight
of cartridge) and slide them on the headshell. To fix the counterweight(s) use the hex
key wrench (#2).
Red : right channel / R+
Green : right channel / R-
White: left channel / L+
Blue : left channel / L-
52 mm
1
3a
3
2