Beurer PM 90 - Handbuch (Seite 43)

42
Setting the speed unit and automatic lap function
There are two functions available in this setting menu.
As some people prefer to have the speed display in a particular unit
when training, two different units are offered as an option. Many
runners prefer the information in min/km instead of km/h.
With the automatic lap function you can set your own specified dis-
tance between 400 and 10,000 metres. The HR monitor then acti-
vates for example a new lap every 400 metres. Example: You run
several 400-metre laps in the stadium and would like to check your
running times. Thanks to the lap function you do not need to press
the
option / set
button as soon as you reach the finish line. You just
have to set the lap distance of 400 metres in this menu once at the
beginning of your training and then the laps will be automatically
recorded and saved through the distance measurement.
menu
Change into the
Spd’nDist menu.
option / set
2 sec
Set Spd’nDist is displayed.
start / stop
By pressing repeatedly you can
change between the speed units.
 In the basic setting [cm]: min/km
(minutes per kilometer) or km/h
(kilometer per hour) is displayed.
 In the basic setting [in]: min/mi
(minutes per mile) or mi/h (miles
per hour) is displayed.