Eneo VKCD-12110F2812IR - Handbuch (Seite 41)

41
6.1.8 MOTION DET
OFF / ON
Motion Detection area of the screen, broken into 24 x 16 rectangle blocks.
You can use MONITOR AREA to give an always on detection area.
• MOTION DET: OFF / ON. Turn on or off the motion detection. Default is ON.
• DETECT SENSE: 0-127 Sets the motion detection sensitivity level.
• BLOCK DISP: ON/OFF: shows visual motion detection as block area.
• DETECT AREA: Enters into separate screen to select blocked area
By default the entire area
is enabled for detections,
using the movement arrows
you move the 2x2 size block
in 12x8 positions around
the screen, press the enter
button will toggle this area
to be withing the detection.
Hold down the enter button
will exit this detection area
settings.