Parkside PT360 - Handbuch (Seite 9)

09
Appliance category / type of gas: Direct pressure butane; direct pressure
butane-propane-mix
The best results are achieved with the
butane-propane mix
Rofill Super 100 (75 % butane, 25 % propane).
Flame temperature: Gas torch 1.300°C
Hot air 600°C
Soldering 450°C
Usage: may only be used outside or in well ventilated rooms
The gas soldering iron is not filled.
Technical specifications for mod. No. PT 360
- Caution- Danger of fire, burning and/or explosion!
- The propane-butane mix Rofill Super 100 is available in any
well-stocked hardware store.
- Switch off the gas soldering iron and ensure that the flame is
off.
- Refill the gas tank only after the soldering iron has cooled
completely.
- Refill the tank in a well ventilated place, in an environment
free of flames or sources of ignition and away from other
persons.
- Smoking is prohibited while you are filling the tank.
- The best results are achieved with the butane-propane mix
Rofill Super 100. Alternatively, even commercial lighter gas
(butane) can be used.
- Direct the torch downwards while filling the soldering iron.
Fill the gas tank (Figure A)
4. Before using the tool