ROCKINGER RO 855 D Automatic trailer coupling with lift bearing - Handbuch (Seite 14)

ROCKINGER
Member of JOST-World
15
Table of contents RO
i
855 D / 865 D
G
B
Note:
When fitting the trailer coupling the EU directive 89/173 and the
relevant national regulations must be observed. The coupling must be
fitted in accordance with the installation and operating instructions
provided.
If the installation of the trailer coupling changes the load values
(e.g. permissible axle load, total weight, permissible vertical load) of
the vehicle, the vehicle documents must be changed accordingly.
We reserve the right to make technical alterations.
Series RO
i
810 B
Non-automatic trailer coupling with flange
– Type 810
Version A with socket pin above
Version B with socket pin below
– Hand lever l 30,2 mm
1. Fitting
14
2. Operating
15
2.1 Hitching 15
2.2 Unhitching 15
3. Maintenance
16 – 17
3.1 Inspection 16 – 17
4. Installation of the
safety sensor
18 – 19
5. Technical data
20 – 21
Drawbar eyes
22
The coupling must be installed by qualified per-
sonnel!
Read these instructions carefully before
installation!
The installation and operating
instructions must be kept in the
vehicle!
!